refinishing red oak hardwood floors – adding stain to first coat of polyurethane to darken the color – 1
A great way to change the look of your wooden floor. One of the main reasons for choosing hardwood floors is that it can achieve almost any type of look or pattern. From light and dark to satin or glossy surfaces, there is every kind and kind of parquet. If that is not enough for you, you can change the look of these floors with hardwood floors even after installation.
Which types of hardwood floors are best for pickling?
While hardwood can be pickled on most types of hardwood floors, the untreated hardwood is the best candidate for pickling. Applying a hardwood floor stain on unfinished hardwood floors before sealing the wood can significantly alter the look of the floor, and provide you with a floor of any color and texture, including those that you may not get with the usual prefabricated flooring products.
Simple steps to the wooden floor stain on your own
Despite what you can achieve with hardwood floors, this is a pretty easy task. In fact, it's something that you can do on your own by following these simple steps:
Step 1: Sand the ground
The first step is to thoroughly sand the floor and then vacuum it to remove any sawdust.
Step 2: Maintain the wood
In this step, run a damp cloth or a mop on the freshly polished floor to raise the grain. This method is known as "popping water" and helps the wood to accept the stain. Wait about 30 minutes for the stain to dry before you start.
Step 3: Spot application
Dip the sponge or rag in the stain and then apply it to the floor. For stain application, move towards the grain, not against it. Start working from one side of the room, move to another, and remove the sponge or rag to ensure even coverage. This also prevents the stain from accumulating on the floor.
Step 4: Remove excess stain
Wipe off vigorously after 5 to 10 minutes to remove any stains. How much time you should plan for soaking depends on the darkness of the desired end product.
Step 5: Let it dry
Allow the stain to dry completely according to the manufacturer's instructions. Apply a layer of polyurethane for a durable finish.